C%2b%2b Ostream Dev Null

By Manasij Mukherjee

One of the great strengths of C++ is its I/O system, IO Streams. As Bjarne Stroustrup says in his book 'The C++ Programming Language', 'Designing and implementing a general input/output facility for a programming language is notoriously difficult'. He did an excellent job, and the C++ IOstreams library is part of the reason for C++'s success. IO streams provide an incredibly flexible yet simple way to design the input/output routines of any application.

这个问题已经在这里有了答案: 9年前关闭。 Possible Duplicate: Implementing a no-op std::ostream 在c中是否有与NULL等价的流?我想编写一个函数,如果用户希望将内部输出输出到某个地方,则将其带入一个流中,但是如果没有,则输出进入某个伪造的地方. 我有一个C应用程序,其中包含大量的std::cout。它运行在linux 2.6.x上。 它运行在linux 2.6.x上。 我需要测试应用程序的性能,因此我正在考虑将 std::cout 重定向到 /dev/null 。. Bool MatchShape (absl::Span shape, const std::vector &pattern) ¶. Returns whether the shape matches the pattern. Negative numbers in the pattern indicate the corresponding shape dime. I combined three different proposals above and one writing directly to /dev/null (so it involves kernel.) Surprisingly the NullStream that got the most votes performed the worst. Here are results for 100,000,000 writes: a) /dev/null: 30 seconds b) NullStream: 50 seconds c) badbit: 16 seconds (the winner in speed, but cannot test for errors!).

IOstreams can be used for a wide variety of data manipulations thanks to the following features:
  • A 'stream' is internally nothing but a series of characters. The characters may be either normal characters (char) or wide characters (wchar_t). Streams provide you with a universal character-based interface to any type of storage medium (for example, a file), without requiring you to know the details of how to write to the storage medium. Any object that can be written to one type of stream, can be written to all types of streams. In other words, as long as an object has a stream representation, any storage medium can accept objects with that stream representation.
  • Streams work with built-in data types, and you can make user-defined types work with streams by overloading the insertion operator (<<) to put objects into streams, and the extraction operator (>>) to read objects from streams.
  • The stream library's unified approach makes it very friendly to use. Using a consistent interface for outputting to the screen and sending files over a network makes life easier. The programs below will show you what is possible.

The IO stream class hierarchy is quite complicated, so rather than introduce you to the full hierarchy at this point, I'll start with explaining the concepts of the design and show you examples of streams in action. Circuit wizard 3.5 crack. Once you are familiar with elements of the design and how to apply those concepts to design a robust I/O system for your software, an understanding of what belongs where in the hierarchy will come naturally.

What do input and output really mean?

To get a good idea about what input and output are, think of information as a stream of characters. This makes sense because whatever we enter through a keyboard can only be characters. Suppose the user enters the number 7479..WAIT..! How do you know the user entered a number? The problem is that you don't really know. All you have is a set of 4 characters: '7', '4', '7' and '9'. It is completely up to you, the programmer, whether you want the input to be a number, to be a string, or to be fodder for /dev/random; whether the characters can be valid for the desired type totally depends upon whether that type can interpret the characters in the input stream as a description for an object of that type.

You have to get the input characters into a recognizable data type for them to be of any use other than as a character array.

IO streams not only define the relation between a stream of characters andthe standard data types but also allows you to define a relationship between astream of characters and your own classes. It also allows you nearly limitlessfreedom to manipulate those streams both using object oriented interfaces andworking directly on character buffers when necessary. (Of course some of the lower level manipulations may be undefined; for example, you can't probe forward into an input stream to see the future!)

How do streams work?

Streams are serial interfaces to storage, buffers files, or any otherstorage medium. The difference between storage media is intentionally hidden by the interface; youmay not even know what kind of storage you're working with but the interface isexactly the same.

The 'serial' nature of streams is a very important element of their interface.You cannot directly make random access random reads or writes in a stream(unlike, say, using an array index to access any value you want) although youcan seek to a position in a stream and perform a read at that point.

Using a serial representation gives a consistent interface for all devices.Many devices have the capability of both producing and consuming data at thesame time; if data is being continually produced, the simplest way to thinkabout reading that data is by doing a fetch of the next characters in a stream.If that data hasn't been produced yet (the user hasn't typed anything, or thenetwork is still busy processing a packet), you wait for more data to becomeavailable, and the read will return that data. Even if you try to seek past theend (or beginning) of a stream, the stream pointer (i.e. get or put pointer)will remain at the boundary, making the situation safe. (Compare this withaccessing data off the end of an array, where the behavior is undefined.)

The underlying low-level interface that corresponds to the actual mediumvery closely is a character buffer (the stream buffer, technically called thestreambuf), which can be thought of as the backbone of the stream. Being abuffer, it does not hold the entire content of the stream, if the stream islarge enough, so you can't use it for random access.

The most important of the basic stream operations are:

  1. First, the stream is initialized with the appropriate type (like a std::string for a stringstream and the filename for an fstream) of values and suitable modes (like ios::in for input and ios::out for output and many more depending on the type of the stream).
  2. After that, you can specify where the I/O should occur, through the get and put pointers. Depending on how you open the stream, the location may already be set appropriately (for example, if you open a file with ios::app, your get pointer set at the end of the stream, allowing appends).

    The member functions associated with setting the get and put pointers are:

    • seekg()and seekp() for .dragging. the get and put pointer, respectively, to the position specified.Both seek methods take an argument (of type streampos) providing a position in the file relative to the beginning of the file (using ios::beg), the end of the file (using ios::end), or the current position (using ios::cur). You may also provide just a specific location, such as io::beg, for the beginning of the file.
    • tellg() and tellp() provide the current location of the get and put pointers, respectively

    The following one-liners should clear up most questions:

    N.B: Be careful when seeking the put pointer into the middle of in thestream. If you put anything in the stream, it will go directly into the stream atthe put location, overwriting the previous contents. In other words, if youneed to insert data in the middle of a stream, you have to manually move thedata that would be overwritten. As a side note, if you're finding yourselfdoing that too often, then you may want to use a string representation of yourdata, which can simplify this kind of random access operation.

  3. Once you're at the right location in the stream, input and output is done through the << and >> operators. If you want to input an object to the stream, use the << operator; for output, use >>. The class for your object must, of course, have provided overloads for these methods. Here's a short example:

    If var is an object (either a built in class or a user defined type), theexact process of the input or output is dependent on the overloaded >> or<< operator respectively.

Error handling with IO streams

Handling errors gracefully is important for building a robust system. The'errors' or 'signals' (e.g., reaching the end of the file) in this casegenerally occur when a stream encounters something it didn't expect.

Whether a stream is currently valid can be checked by simply by using the stream as a Boolean:

C 2b 2b Ostream Dev Null Key

More detailed status of the stream can be obtained using the good(), bad(), fail() and eof() functions. The clear() function will reset the stream and clear the error, which is necessary to perform any further IO on the stream.

  • good() returns true when everything is okay.
  • bad() returns true when a fatal error has occurred.
  • fail() returns true after an unsuccessful stream operation like an unexpected type of input being encountered.
  • eof() returns true when the end of file is reached.

C 2b 2b Ostream Dev Null Code

You can detect that a particular read or write operation failed by testing the result of the read. For example, to check that a valid integer is read from the user, you can do this:

This works because the read operation returns a reference to the stream.

An example of creating a stream-enabled object

Here is a simple example of an utility designed for writing out logfile entries from command line arguments that takes advantage of some important stream facilities. If you don't understand something, refer to the tutorial on that particular topic.

Null

This example should be pretty straightforward. The only two 'new' things here are:

  1. The type ostream, which is the base class for any stream that accepts writes, such as ofstream and ostringstream. The standard stream objects: std::cout, std::cerr, std::clog and their 'wide' versions (e.g. std::wcout), are objects of this ostream class.
  2. The use of stringstreams to simplify string handling. See the section on stringstreams below for more details on how stringstreams work.

A few other things to note

The << operator takes in an ostream object, modifies it andreturns it, even though it would have been enough to take the ostream objectand modify it, with no return value. The value of returning the object is thatyou can chain operations, as in the following statement:

As the operator accepts an ostream, you can do anything with the datawritten to the stream simply by choosing a different subclass of ostream. Theexample shows writing to a file and to the system log console/file. You couldalso compress it and archive it, send it over a network, parse it later withanother program to determine the number of log entries in a specified timeinterval, etc. Basically, you can use the class for any sort of outputoperation for which a subclass of ostream exists.

Parts of the IO stream library

Now that you've seen the basic problems solved by IO streams and how they work, let's look at the different elements of the IO streams library, with a few examples of each in action.

Standard Stream Objects for Console I/O: (cout, cin, cerr, clog, etc.)

These are declared in the <iostream> header and provide a consistent interface for console I/O. They allow you a lot of control about the exact way you want to read a value from the stream into the given variable (or write the variable to the stream).

File I/O

File I/O is done by manually declaring objects of the ifstream, ofstream orfstream classes (from the <fstream> header) and then associating a filewith the stream by using the stream's open method with the file's name as anargument. File I/O is particularly important because files are often used torepresent a large variety of media, such as the console, devices, disk files,virtual memory, list of running processes and even the black hole '/dev/null'.This is especially true on *nix systems where it is commonly said that'Everything is a file'.

C%2b%2b

C 2b 2b Ostream Dev Null Command

Here is a very very simple example of writing to a file:

String Streams

Strings are streams and streams are strings. Both are character arrays, buteach has a totally different interface (random access strings vs serialstringstreams). By providing both std::string and stringstreams, the C++standard library ensures that you have the flexibility to choose eitherinterface for your design.

By including the <sstream> header, you can make objects of theistringstream, ostringstream and stringstream types. These objects make certainkinds of string manipulations much easier.

You can, for example, open a string in a stringstream, extract a floating point number from it to do some operations, and put it back in the stream.

The output is

The lower level, where streams meet buffers

This is the most interesting and confusing part of this library, letting youmanipulate streams at their lowest levels, bytes and bits. This is accomplishedby the abstract class streambuf from which stringbuf and filebuf are derived.Every stream object has one of those as their backbones. Their function rdbuf()lets you access a pointer to the underlying stream buffer.

Here is a very simple example of copying a file efficiently with those buffers (thankfully, no ultra-complicated manipulation is involved here!).

Advertising | Privacy policy |Copyright © 2019 Cprogramming.com | Contact | About

I’m looking for a std::ostream implementation that acts like /dev/null. It would just ignore anything that is streamed to it. Does such a thing exist in the standard libraries or Boost? Or do I have to roll my own?

Answers:

If you have boost, then there’s a null ostream & istream implementation available in boost/iostreams/device/null.hpp . The gist of it:

Answers:

The simplest solution is just to use an unopened std::ofstream. This
will result in an error state in the stream, but most outputters won’t
check this; the usual idiom is to leave the check to the end, after the
close (which would put it in code you wrote, where you know that the
stream should be invalid).

Otherwise, it’s pretty straight forward to implement: just create a
streambuf which contains a small buffer, and sets it up in overflow
(always returning success). Note that this will be slower than the
unopened file, however; the various >> operators will still to all of
the conversion (which they don’t do if the stream has an error state).

C 2b 2b Ostream Dev Null Test

EDIT:

' : c; }};

It’s usual to provide a convenience class derived from istream
or ostream as well, which will contain an instance of this
buffer which it uses. Something along the lines of:

Or you can just use an std::ostream, passing the address of
the streambuf to it.

Answers:

C%2b%2b Ostream Dev Null

If you set badbit on a stream it won’t output anything:

Outputs:

Answers:

I know this is very old thread, but I would like to add this to anyone who is looking for the same solution without boost and and the fastest one.

I combined three different proposals above and one writing directly to /dev/null (so it involves kernel.)

Surprisingly the NullStream that got the most votes performed the worst.

Dev

Here are results for 100,000,000 writes:

Here is the test code

EDIT

The fastest solution – where we use badbit – has a downside. If the program checks if the output is successfully written – and I have no idea why the program should not do that – then it will fail because of this badbit.
Therefore, the runner up – bost – is the winner.

Tags: c++